Thermal conductivity measuring instrument according to the method with heat flow meter for determining the thermal conductivity and the thermal resistance of building, insulation and other materials.
Clamping field: Dimensions 10 x 15 m, clamping grid: 1 x 1 m, max. load per clamping point in each direction 1,000 kN,
three test frames for loads up to max. 4,000 kN,
different abutments and numerous supports for individual test setups,
various servo-hydraulic test cylinders for static and dynamic loads from 100 to 2,500 kN,
various hydraulic presses for static loads from 50 to 1,500 k,
three stationary hydraulic power packs with 80, 165 and 300 l oil/min, available on all test benches
mobile hydraulic pumps for electric, pneumatic and manual operation,
a four-column testing machine for loads up to 4,000 kN in compression and 1,000 kN in tension,
a four-column testing machine for static and dynamic loads up to 600 kN,
a two-column testing machine for loads up to 250 kN,
various testing machines for the determination of hardened concrete properties (shared use with the Materials Testing Office),
Corrosion test chamber for Kesternichtests according to DIN 50018,
Heatbox for experiments up to 120°C, internal dimensions 2.00 x 1.90 x 1.00 m, six temperature sensors with data logger,
Climate chamber for experiments between -30°C and +30°C, internal dimensions 2.50 x 1.90 x 2.00 m, six temperature sensors with data logger,
Tearing frame for concrete slabs, max. load 2,000 kN, max. dimensions of the slabs 2.20 x 0.92 x 0.40 m,
extensive modern measurement technology and software,
non-contact measurement technology: photogrammetry, strain and deformation measurement, high-speed camera, 3D scanner,
modern photographic equipment for the documentation of experiments
Endoscope for examination and documentation of crack development in joints,
two bridge cranes above the span field for max. 12.5 t each,
a bridge crane over the gallery for max. 6 t,
Forklift truck for loads up to 3 t,
Mobile crane for loads up to 3 t,
well-equipped workplaces for metal processing and test preparation,
Welding equipment for MIG/MAG, TIG and shear stud welding.
Equipment of the concrete hall
Eirich intensive mixer with vacuum pump, 75L mixing volume,
two concreting platforms for the production of test specimens with a length of up to 8.40 m
Compulsory mixer for max. 550 l concrete,
one bridge crane for max. 6 t,
various internal and external vibrators,
Fraction boxes for different aggregate groups.
Equipment of the kiln hall:
Combi-band furnace with 4mx3mx3m firing chamber,
Small kiln with 2mx0,6mx0,4m firing chamber
Services
Production of test specimens made of reinforced concrete, prestressed concrete and steel as well as composite structures,
Planning and execution of individual component tests within the scope of research, development and teaching,
Component tests and expert opinions within the scope of approval procedures and product developments,
Load tests and assessment of components on site,
Determination of material characteristics of different building materials,
Development of FE-models for the analysis of components.